outlast-tyre-glaze
  • Our longest lasting shine
  • Dries in minutes to stop sling
  • Super high gloss finish

ARMOR ALL® Outlast Tyre Glaze is a revolutionary new formulation to deliver our longest lasting shine yet. The synthetic polymers bond to the rubber surface, giving it exceptional durability. Plus the formulation dries in minutes so you avoid unsightly sling on the side of your car.

DIRECTIONS:

  1. To prevent staining, cover ground beneath tyre before application.
  2. Make sure tyres are clean and dry. Apply in a well-ventilated area.
  3. Hold can 10-15cm from tyre and spray uniformly onto the tyre sidewall using a quick sweeping motion. Best results are achieved with a light to medium coat.
  4. Immediately wipe up any overspray from the wheels and other surface before it sets to avoid smeary appearance.
  5. To avoid clogging nozzle, turn can upside down and spray to clear nozzle after use. For best results, do not apply in windy conditions or in direct sunlight in hot weather. Allow to dry for 30 – 45 mins before driving.

ARMOR ALL Detailing Tip: To make cleaning wheels/rims easier, try ARMOR ALL Wheel Cleaner. Simply Spray on and hose off to dissolve grease. Road grim and brake dust.

View Material Safety Data Sheet
extreme-tyre-shine-500ml
  • Locks in shine for a long lasting wet look
  • No wipe formula, simply spray on

By simply spraying onto your tyres ARMOR ALL Extreme Tyre Shine makes it easy to achieve a long lasting wet look shine for your tyres. The no wipe formula acts as a shine shield, keeping them looking like new for longer.

Where to Use: Use only on tyres. Do not use on cycle tyres. Not for use on treads, floors vehicle controls (pedals, steering wheels), bench or cycle seats, brake drums and other surfaces where slipperiness may be hazardous. Do not use on or near clear plastic or glass (may cause smearing), fabric, woven materials or paint. Any product that remains on cement or drive should be washed with detergent to prevent stains and slippery conditions.

For Best Results: Repeat application for maximum shine.

Directions

  1. Hold bottle 10 to 15cm away from a clean and dry tyre and spray evenly over tyre sides, being sure to avoid treads.
  2. Allow product to stand for 15 minutes before driving. Do not wipe as any drips or runs will disappear leaving a brilliant shine.
  3. To remove overspray on wheels or paint, wipe with a dry cloth.

KEEP OUT OF REACH OF CHILDREN

View Material Safety Data Sheet
extreme-tyre-shine-350g
  • Our Most extreme shine yet
  • Easy, no mess application
  • Protects tyres from fading & cracking

Use ARMOR ALL Extreme Tyre Shine for a breathtaking wet look shine. ARMOR ALL Extreme Tyre Shine is formulated with a blend of gloss enhancers to deliver our most extreme shine yet. Thanks to its one step, no wipe formula and easy spray application, you can achieve a smooth even finish without the mess. When used regularly, ARMOR ALL Extreme Tyre Shine also helps preserve your tyres by protecting them from harmful elements that can cause cracking and fading.

Attention:Use only as directed. Use only on sidewalls of tyres. Do not use on cycle tyres, treads, floors, vehicle controls (pedals, steering wheels), bench or cycle seats, brake drums and other surfaces where slipperiness may be hazardous. Do not use on or near clear plastic or glass (may cause smearing), fabric, woven materials or paint. Wash driveway with car wash or driveway cleaner immediately after use to avoid staining and slippery conditions. NOTE: Do not drive vehicle immediately after application when tyres are extremely wet. Unabsorbed product may spin off onto car body parts.

For Best Results: Repeat application for maximum shine.

Directions

  1. Hold can 15 to 20cm away from a clean, dry tyre and spray evenly over tyre sides. Be sure to avoid treads.
  2. Allow product to stand for 15 minutes before driving. Do not wipes as any6 drips or runs will disappear, leaving a brilliant shine.
  3. To remove overspray on wheels or paint, wipe with a dry cloth.

KEEP OUT OF REACH OF CHILDREN

Material Safety Data Sheet – MSDS
View Material Safety Data Sheet
tyre-foam
  • Apply in seconds for clean & shining tyres
  • Simply spray on and walk away
  • Cleans dirt & grime in minutes
  • Enhances colour & protects from the elements

It takes little effort and only minutes to achieve clean and shining tyres with ARMOR ALL Tyre Foam. The fast acting formula lifts dirt and grime from the tyre and carries it away leaving behind a lustrous shine. ARMOR ALL Tyre Foam protects against the elements that can crack and fade sidewalls without harming wheels or wheel covers.

Where to Use: Use only on tyres. Do not use on cycle tyres. Do not use on treads. Avoid overspray on brakes or any surfaces where slipperiness my be hazardous. Residue from tyre foam can spot driveway. To avoid, rinse driveway with water immediately after use.

For best results: If tyres are excessively dirty or muddy, rinse first with water.

Directions

  1. Shake can well.
  2. Hold can 15-20cm away and spray in a circular sweeping motion, ensuring full, even coverage.
  3. Allow 5-10 minutes to dry.
View Material Safety Data Sheet
wheel-cleaner
  • Easily removes brake dust
  • Simply spray on & rinse off
  • Deep cleans to a bright shine
  • Acid free formula

ARMOR ALL Wheel Cleaner is a fast acting special formulation that penetrates hard to reach areas, dislodging tough dirt, road grime and brake dust from wheel rims, covers and hubcaps. It is safe to use on Aluminium, clear coated, chrome and alloy wheels and plastic wheel covers.

Where to Use: Use only on wheels. Do not use if wheels are damaged or in poor condition. Do not allow product to dry on wheel. Brake dust and other residue from wheels can spot driveway. To avoid, rinse driveway immediately after use.

For best results: apply ARMOR ALL Wheel Cleaner as directed, prior to washing vehicle. For heavy dirt and baked on brake dust build up, a second application may be required with the use of a soft brush or soft cloth.

Directions

  1. Use a strong stream of water to rinse wheel.
  2. Spray ARMOR ALL Wheel Cleaner onto wheel and allow 30 seconds to penetrate.
  3. Hose of with a strong stream of water.
  4. Dry wheel with a soft cloth to prevent water spotting.

Wheel Protectant

Available in 125ml and 500ml

protectant-wheel
  • Repels brake dust
  • Repels road grime
  • Repels dirt

ARMOR ALL Wheel Protectant makes cleaning easier. It forms a protective coating on your wheels / rims which repels brake dust, dirt and road grime.

Directions

  1. Ensure wheels and tyres are totally CLEAN and DRY before applying this product.
  2. Shake can well before use. Use only in well ventilated areas.
  3. Spray product LIBERALLY over entire rim.
  4. Do not wipe or rub product. Do not touch rims after application.
  5. Wait at least 1 hour before driving.

For Best Results: Apply a layer and allow to dry for at least 1 hour. Apply a second layer liberally and let stand before driving. Longer drying time will improve the product’s performance.

View Material Safety Data Sheet